We Build Champions | Products-Service-Advice

Support


Installation Notes for BOE Products can be found here.

 
INSTALLATION INSTRUCTIONS
Pressurized Swirl Header Tank
Download PDF
TOC-Wet Sump
Download PDF
Evora Cold Air Intake
Download PDF
Surge Tank Download PDF
ITG 3" CAI for Elise/Exige and REV Kits Download PDF
Front Charge Cooler Heat Exchanger Download PDF
REV300 and REV400 Installation Notes Download PDF 
Race Links & Half Links Download PDF
ClamHinge Installation Notes

Download PDF

 

Catch Can Install Notes Download PDF
Evora Clutch Master Cylinder Install Notes Download PDF
Tow Bar Install Notes Download PDF
Walbro Fuel Pump Install Notes

Download PDF

Oil Cooler Install Notes Download PDF
Rear Tow Point Install Notes Download PDF
Evora Lowering Cups Download PDF
BOE Fresh Air Scoop Download PDF
Evora Tuned Headers Download PDF
BOE Evora Vacuum Pod Kit Download PDF

 

 

Tune Request Form- Fill out AFTER purchase of Tune- Word Doc Download Doc
Tune Request Form- Fill out AFTER purchase of Tune-PDF Download PDF
2ZZ Toyota Engine Rebuild & Service Manual Download PDF
Lotus Elise MY2005 Electrical Schematic Download PDF
Lotus Elise/Exige/211 Electrical Schematic MY2006-2011 Download PDF
T4 IAT Installation Notes Download PDF

 

 

 

Terms of Service

 

TERMS AND CONDITIONS
All orders placed with BOE Fabrication, LLC via BOEFAB.com constitute the acknowledgment and acceptance of all conditions listed at www.BOEFAB.com and below. All parts shall remain the property of BOE Fabrication LLC until paid in full. If items were purchased from a retailer other than BOEFAB.com, returns and/or warranty claims MUST be handled through that retailer. BOE Fabrication will only handle returns, exchanges or warranties with the direct purchaser (i.e. retailers, dealers, or BOEFAB.com direct customers).

ORDERS
The most efficient method for placing orders with BOE Fabrication LLC is via the website store. Standard or non-customized orders placed through the website will typically be processed within 3-5 business days. Same day shipping is not guaranteed. Notices will be sent for orders that contain items that are currently on back-order. Please use an accurate email address during checkout to ensure all communications about your transaction are successful. Phones orders can also be processed Monday-Friday 9:30am-3:00pm CST.

In the event that our computer server/database encounters technical difficulties causing incorrect product pricing or shipping calculations, BOE Fabrication will correct all discrepancies at the time of processing. Customers will be notified of any errors and will have the option to continue with their order with corrected totals or cancel their order. BOE Fabrication will not be held responsible for any miscalculated totals due to website errors.

All prices, materials, design, color, contents included with a product, and product specifications are subject to change without notice. Some product images may be shown with optional items that are sold separately. Product photos are for illustration purposes only; some product colors/pigmentation may differ from actual photos.

BOE Fabrication accepts the following payment methods through our secure online website and processed by PayPal: Visa, MasterCard, American Express or Discover. Payments sent through PayPal can be made to the BOE Fabrication account: sales@BOEFAB.com. Payments will be accepted in U.S. currency only. For custom orders, BOE Fabrication will accept Cash, Cashier Checks and Personal Checks. Funds must clear before the order is processed. Please allow 7-10 business days for completion. BOE Fabrication is not responsible for undeposited or lost funds.

SHIPPING POLICY
All orders will be shipped with signature guarantee. For an exception, you must contact BOE Fabrication at sales@BOEFAB.com before purchase. No exceptions will be made on orders over $500.

We ship all orders to the address specified during checkout as the ‘shipping address.’ Please use a deliverable address. BOE Fabrication will not be held responsible for the loss of a package due to inaccuracies in the ‘shipping address.’ All undeliverable packages returned to BOE Fabrication will result in a refund to the customer less shipping charges.

Shipping charges are based on weight and dimensions. During checkout, several shipping options are provided. Please select the option that is suitable to your needs. Shipping times are an estimate and cannot be guaranteed. Tracking information, if obtainable, will be emailed to the customer when the package leaves our facility. International shipments can be delayed due to Customs which is beyond the control of BOE Fabrication. International shipments can take 30 days to reach destination. Any duties, tariffs, and/or brokerage fees are the sole responsibility of the customer. Please be aware of your country’s Customs and Tariff Policies before placing an order.

Items on back-order will ship as soon as they become available. Updates on availability will be emailed when possible to the customer. Some items may remain on back-order longer that originally quoted. Back-ordered items may be canceled for a full refund before they ship.

BOE Fabrication packs all merchandise carefully to prevent damage during shipments. Occasionally, damage may still occur in transit. Please inspect your package immediately prior to accepting delivery. Damages and evidence of tampering must be reported to BOE Fabrication and shipping carrier immediately. If damage is observed, refuse the package and 'return to sender'.

If you received a wrong item, contact BOE Fabrication at sales@BOEFAB.com within 2 business days from the date of receipt to obtain a valid 'return merchandise authorization' (RMA) number. Replacements will be sent once the wrong item has been received and confirmed by BOE Fabrication.

RETURNS
BOE Fabrication will only handle returns for the direct purchaser. If the purchase was made from a retailer other than BOEFAB.com, please contact the place of purchase for further assistance. 

Returns on ‘new’ merchandise for exchange or refund will be allowed within 30 days from the date of shipment. ‘New’ merchandise cannot be used or show signs of damage from installation or mounting. If you install or modify parts ordered in any way, you automatically waive your right to returns, refunds or exchanges.

All returns must be accompanied with a ‘return merchandise authorization’ (RMA). To receive an RMA, you must contact BOE Fabrication at sales@BOEFAB.com. When requesting an RMA, please provide the following details: Name, Order Number, Date of Purchase, and Phone Number. Returns will not be processed without an RMA. Returns must also be received within 14 days from the issuance of the RMA. A RMA does not guarantee a refund or replacement. All returns will be inspected upon return to BOE Fabrication for return eligibility. Returns must be shipped prepaid by the customers. Please maintain all shipping and tracking information until your return is processed since BOE Fabrication is not responsible for items lost in shipment. Shipping charges are not refundable. Please include a copy of your original invoice and contact information with all returns. Eligible returns will be exchanged or refunded less a 25% restocking fee. Refunds will be issued by check or to the credit card used for the original purchase.

Purchases may be cancelled for a full refund before the order ships. Please contact BOE Fabrication immediately at sales@BOEFAB.com to stop the processing of an order. Once cancellation is confirmed, a credit will be issued.

Orders already shipped from BOE Fabrication's facility cannot be cancelled and will fall under the Returns for Refund or Exchange guidelines.

Special order or customized items cannot be cancelled, returned or exchanged.

It is the responsibility of the customer/installer to verify the proper size and application of all parts before installation.

WARRANTY
All BOE Fabrication brand products are subject to a 1 Year Limited Warranty from the date of original purchase. If a product fails, it will be repaired or replaced at BOE Fabrication’s option when it has been determined by BOE Fabrication to have failed due to defects in materials or workmanship. Warranty claims must be made by the original purchaser. If the purchase was made from a retailer other than BOEFAB.com, please contact the place of purchase for further assistance.

This warranty is limited to repair or replacement of the merchandise only and shall not, in no event, exceed the original purchase price. BOE Fabrication will not be held responsible for secondary or consequential damages or costs (including labor, towing, etc.) incurred due to failure of this product

Warranty claims must ship pre-paid to BOE Fabrication for review. Claims must include the failed part(s), RMA number, and original proof of purchase. If the claim is missing any of these items, it may be rejected and returned to sender.  Product must be received by BOE Fabrication within 14 days of RMA’s issue date. Please note that before BOE Fabrication can issue an RMA for any product, it is first necessary for the installer or end user to contact sales@BOEFAB.com to discuss the problem. Most issues can be resolved via email. Under no circumstances should a product be returned or a RMA requested before the above process transpires.

This warranty applies to the original purchaser only and is non-transferrable. Improper use, installation, modification, abuse, or unauthorized repairs or alterations voids this warranty. Credit for defective products will be issued pending inspection by BOE Fabrication. This warranty does not extend to third party products often used in BOE Fabrication products, such as fuel pumps, turbochargers, or any other non-BOE Fabrication brand products. 

Note: All engine modification components, except those that are exempt by local laws, are intended for OFF-ROAD use only. These components are legal for racing vehicles only, which may never be used on public roads and highways. Federal and many state laws prohibit the removal, modification, or rendering inoperable of any device or element of design affecting vehicle emission or safety in a vehicle used on public highways. Violation of such laws may subject the owner or user to a fine or penalty. Installation of this part may void the warranty coverage on your vehicle. The loss of vehicle warranty rests solely on the vehicle owner. Vehicles modified by the use of performance parts may no longer be lawfully used on public highways. User assumes all cost and risks associated with these items. BOE Fabrication is not liable for any fines or penalties incurred by the user. Please know your state and local laws.

 

 

Contact

Shop Hours
Monday - Friday: 10AM-5PM CST

Phone
+1 913-227-4139

Email
sales@boefabrication.com

Shipping and Receiving
BOE Fabrication
7111 W. 151st Street
Suite 341
Overland Park, KS 66223

Search our store